How to maintain the decapping and brushing machine of the gallon water line?

Views: 461 Author: Site Editor Publish Time: 2022-03-02 Origin: Site

Comark Machinery specializes in the production of pure water equipment, mineral water equipment, iron and manganese removal equipment, softened water equipment, bottled water equipment, and barreled water production equipment

bottle decapping (1).jpg

In order to meet the needs of the majority of mineral water plants and pure water manufacturers, the tedious empty barrel treatment process has been turned into simple automation. Our company has introduced and absorbed the advanced technology of brushing bucket caps at home and abroad, combined with the actual situation of the existing manufacturers and the management requirements of the drinking water industry, and developed the 5 gallon de-capping machine.

de-capping 1.jpg

The 5 gallon of water equipment has reliable performance, simple operation and convenient maintenance:

1. Always check the cleanliness of the cap extraction head and whether the connecting screws between the cap extraction head and the cylinder are loose;

2. If it is found that some barrels cannot be pulled out during use, it may be that the size of the bottle neck is abnormal; if it is found that it is difficult to separate batches of barrels and lids, check whether the connection between the lid pulling head and the cylinder is loose or displaced, and pay attention to the air. Whether the source pressure is lower than 5Mpa;

3. During the use of the main unit, do not put your hand into the hood to avoid injury during work;

4. Please turn off the air source during maintenance of the brush barrel capping machine to avoid damage to the equipment or personal injury;

5. It is strictly forbidden to use the water pump in the absence of water, and it is strictly forbidden to reverse the brush;

6. Keep the water tank clean, no dirt can enter the water tank;

7. Check whether the sealing performance of the outer brush shaft is good;

8. The electrical components of the brush barrel capping machine are maintained and inspected once a month to ensure that they are always in good condition during use.


×

Contact Us

×

Inquire

*Name
*Email
Company Name
Tel
*Message

By continuing to use the site you agree to our privacy policy Terms and Conditions.

I agree