pop can filling and seaming machine for fruit juice(non carbonated) has such prominent features as high filling speed , consistent height from the liquid level in the can to the can mouth after filling , stable machine operation , good sealing quality , beautiful and decent appearance , convenient use and maintenance , etc
The machine is a device developed exclusively by on the basis of digesting and absorbing domestic and international (still) pop can filling and seaming machine (sealing machines).
It adopts the normal pressure filling principle. After it passes through the dialing wheel, the empty can will enter into the lift can supporting disc, and the filling valve is aligned with the empty can, which will rise for sealing. Meanwhile, the valve port of the filling valve is automatically opened. When the filling can will be conveyed to the sealing machine head by the hook chain. The cap will be sent onto the can mouth by the cap rises, the pressing head presses he can mouth, the sealing wheel carries out pre-sealing and then real sealing. After it is sealed, the can is pushed out by the beating head of the cap beating mechanism and then enters into the can discharging procedure.
The machine adopts PLC, frequency converter, human machine interface controlling system, having the advanced controlling technologies, such as frequency control; no can no filling and so on.
|Production capacity C/H)||1000-2000||3000-6000||4000-9000|
|Overall Disamensions (mm)||1750*1140*1950||2320*1400*1900||2580*1650*1900|
We are confident about our product quality because of the Quality Assurance System backed by technical capabilities and production capacity.
We believe “all steps in production are quality control processes”
01 - Can Stacker.
1-PLC control of the whole machine, fully automatic operation;
2-Adapt to various stack types and bottle types, easy to adjust;
3-Segmented transmission with high-quality conveyor chain, the output section can be arbitrarily lengthened;
4--Using 304 material, the whole machine is beautiful and elegant;
02 - Slide Type Empty Tank Spray Washer.
1-Scope of application: water spraying and drying on the slope of the tin can.
2-water spraying box made by stainless steel structure.
3-the built-in ￠32 mm stainless steel spray pipe, divide into two segments, hot and cold water tank temperature higher than 85 degrees.
4-tank cage, by ￠article 8 mm stainless steel.
5-the support frame is composed of 50mm x 50mm x 2mm stainless steel square pipe.
03 - Filling Parts.
1- 304/316 Stainless steel high precision filling nozzle
2- Filling volume adjustable in fine rank, same liquid level after filling
3- All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean
4- 304/316 stainless steel filling pump
5- Efficient spray nozzle rinse thoroughly and save water for flushing
04 - Capping Parts.
1- Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
2- All 304/316 stainless steel construction
3- No bottle no capping
4- Automatic stop when lack of bottle
5- Capping effect is stable and reliable, Defective rate ≤0.2%
WATER LINE EQUIPMENT
We are confident about our product quality because of the Quality Assurance System backed
by technical capabilities and production
capacity. We believe “all steps in production are quality control processes”..
01 - RO Reverse OsmosisWater Treatment System.
1 Raw water tank + Raw water pump
2 Silica sand filter + Active carbon filter + Sodium ion exchanger + Precision filter + Security filter
3 Reverse Osmosis (one level)
4 UV sterilizer
5 Finished water tank + Pure water pump
1/Stainless steel high pressure film shell
2/All kinds of capacity indicator, pressure indicator, electricity magnetic valve, balance device and pipe valve system
3/Online type pressure auto self-protection device
4/Online type electricity indicator (with stable compensation)
5/System safe protecting and alarm system
02 - Pre-process system.
1 High-shear emulsifying tank + Plate heat exchanger
2 Mixing tank
3 UHT sterilizer + homogenizer machine + Buffer tank
4 Hot water system + Hot water tank
5 CIP cleaning system
03 - Spray Sterilizing Chiller.
including local control cabinet and electrical control device
1/Mainly for cooling and sterilization
2/The main parts of the machine are made of stainless steel, the top is designed to be openable for easy maintenance and observation
3/Nozzles are manufactured using U.S. technology and spray water evenly
4/Conveyor belt adopts Rexnor technology, flat surface with small wear
04 - Bottle Packing Mahcine.
Once your beverage product has been filled and the bottle has been labelled, the primary package is gently transferred using conveyors to its secondary packaging process. The final result is the package the customer sees at the point of sale, so it needs to grab their attention. These packs ensure protection from elements such as weather, pressure and temperature changes.
Whether you choose shrink-printed film, nested packs or wraparound cartons, King Machine packers gently feed bottles to ensure durable and cost-effective packs.