Development direction of soft drink filling machine

Views: 642 Author: Site Editor Publish Time: 2020-07-09 Origin: Site

Carbonated soft drink filling machine is an automatic packaging filling machine controlled by PLC and other peripheral circuits which is a combination of pneumatic components and mechanical devices. The actuator of the filling machine is a cylinder. Two-position five-way solenoid valve controls its forward and backward. The working position of the cylinder is detected by the magnetic switch and the proximity switch and fed back to the PLC. The PLC sends a control command to the solenoid valve of the corresponding cylinder through the program to control the movement of the cylinder.


The development trend of gas-filled beverage filling machine: multi-function


Carbonated soft drink filling machine can be used for hot filling of tea beverages, coffee beverages, soy milk beverages, fruit juice beverages and other beverages; both can be filled in glass bottles and polyester bottles. The filling speed of carbonated beverage filling machine with high speed and high output is up to 2000 cans/min. The filling valves of German KHS company, SEN company and KRONES company have reached 165, 144 and 178 respectively. The filling valve of non-carbonated beverage filling machine has 50-100 heads, and the filling speed is up to 1500 cans/min.


The development trend of gas-filled beverage filling machine II: high technical content and strong reliability. The whole line of self-control level and high efficiency of the whole line. The on-line detection device and the metering device are complete, which can automatically detect various parameters and the measurement is accurate. High-tech products integrating machine, electricity, gas, light and magnetism are constantly emerging.


The development trend of gas-filled beverage filling machine is three: strong supply capacity for complete sets.


For example, an edible oil filling line is composed of a combination of microcomputer components, control software, filling and capping, which combines actual productivity with theoretical technology. Can provide users with engineering design, installation, commissioning, and finally submitted to the user for acceptance.

 beverage filling

For example, simulation design technology will be commonly used to store various machine units in the form of a database in the computer, digitize the drawings and enter the computer, and then enter the actual production indicators and data, possible failures, etc. into the computer, and then the engineer will work according to the actual situation Operate the situation, demonstrate the production capacity, scrap rate, production link matching, where is the bottleneck of the production line, etc., and modify the model according to the user's opinion until the user is satisfied.


If you encounter any problems about anything, please feel free to send us inquiry and we will do our best to assist you to solve the issue.



Contact Us

By continuing to use the site you agree to our privacy policy Terms and Conditions.

I agree