100-150 BPM Aluminum Beer Can Filling Machine/Canning Equipment Line

The machine is a device developed exclusively by on the basis of digesting and absorbing domestic and international (still) pop can filling and seaming machine (sealing machines). 

It adopts the normal pressure filling principle. After it passes through the dialing wheel, the empty can will enter into the lift can supporting disc, and the filling valve is aligned with the empty can, which will rise for sealing. Meanwhile, the valve port of the filling valve is automatically opened. When the filling can will be conveyed to the sealing machine head by the hook chain. The cap will be sent onto the can mouth by the cap rises, the pressing head presses he can mouth, the sealing wheel carries out pre-sealing and then real sealing. After it is sealed, the can is pushed out by the beating head of the cap beating mechanism and then enters into the can discharging procedure.

The machine adopts PLC, frequency converter, human-machine interface controlling system, having the advanced controlling technologies, such as frequency control; no can no filling and so on.

We are confident about our product quality because of the Quality Assurance System backed by technical capabilities and production capacity. 

We believe "all steps in production are quality control processes".

01 - Can Stacker

1-PLC control of the whole machine, fully automatic operation;

2-Adapt to various stack types and bottle types, easy to adjust;

3-Segmented transmission with high-quality conveyor chain, the output section can be arbitrarily lengthened;

4-Using 304 material, the whole machine is beautiful and elegant;

02 - Slide Type Empty Tank Spray Washer.

1-Scope of application: water spraying and drying on the slope of the tin can.

2-water spraying box made by a stainless steel structure.

3-the built-in ￠32 mm stainless steel spray pipe, divide into two segments, hot and cold water tank temperature higher than 85 degrees.

4-tank cage, by ￠article 8 mm stainless steel.

5-the support frame is composed of 50mm x 50mm x 2mm stainless steel square pipe.

03 - Filling Parts.

1- 304/316 Stainless steel high precision filling nozzle

2- Filling volume adjustable in fine rank, same liquid level after filling

3- All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean

4- 304/316 stainless steel filling pump

5- Efficient spray nozzle rinse thoroughly and save water for flushing

04 - Capping Parts.

1- Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping

2- All 304/316 stainless steel construction

3- No bottle no capping

4- Automatic stop when lack of bottle

5- Capping effect is stable and reliable, Defective rate ≤0.2%

this is other customer can complete line for your reference, if you need any more detail, pls contact me